SK599-AT5
Driving
Truck
4-52
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll
ri
ght
s
re
se
rve
d
.
4.15.1.
Folding the buffer beam
the following steps must be carried out to fold the buffer beam:
1. Remove the two R-clips (
1
);
2. Remove the two pins (
2
) from the tube;
3. Slide the rear part of the buffer beam (
3
), till the holes in both tubes (for the benefit of the pin
connection) are in one line;
4. Reassemble the two (at step 2) removed pins to the tube (
4
);
5. Lock the two pins with the (at step 1) removed R-clips (
5
);
6. Remove the R-clip of the pin on the frame (
7
);
7. Tilt the entire buffer beam vertically against the frame of the vehicle (
6
);
8. Lock the buffer beam with the (at step 6) removed R-clip (
7
);
9. Remove the plug from the plug connection.
CAUTION!
After folding the buffer beam, check if the pin connections are correctly locked to
prevent dangerous situations.
Picture 4-18
