SK599-AT5
Driving
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
4-27
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
4.10.
Speed regulators
4.10.1.
Cruise control
The
cruise control
allows driving at a constant vehicle speed without using the accelerator.
Cruise control
is operated by the
right control lever
on the steering column (
A. + :
Enable
cruise
control
;
-
Speed up (at 0.5 kph (0.3 mph)) (spring returned to centre position);
B. -- :
Enable
cruise control
;
-
Speed down (at 0.5 kph (0.3 mph)) (spring returned to centre position);
C. RES:
Enable
cruise control
with use of last set value;
D. OFF:
Disable
cruise control
(spring returned to centre position).
Activate cruise control
Activating
cruise control
can be carried out in two different ways (
1. By moving the right control lever shortly in
direction A or B
:
-
The current vehicle speed is stored till the ignition key is removed;
2. By pressing
RES
on the end of the right control lever (
direction C
):
-
If the
cruise control
is used since the ignition is turned on, the speed will go to the last
set value;
The
cruise control
can only be activated when the vehicle speed is higher than 30 kph (18.7 mph).
Adjust cruise control
If the
cruise control
is activated, the speed can be increased or reduced by moving the right control
lever in the
direction of A or B
(see
):
-
One short movement: the speed increases/reduces with 0.5 kph (0.3 mph);
-
One longer movement: the speed increases/reduces gradually in steps of 0.5 kph (0.3 mph).
Picture 4-6
