background image

Warning Decal Placement

Setup

The decals shown at the right have been placed on the
scooter. If a decal is missing or illegible, please call our
Customer Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time, to order a free replacement decal. Apply the replace-
ment decal in the location shown.

Before using the scooter, make sure that the scooter is set up
as described and that all parts are securely tightened.

1.

Firmly press the thumb tab and pivot the upright up until it
locks in a nearly vertical position.

2.

Insert the handles into the stem until the lock pins are visi-
ble in the holes in the stem.

3.

Open the quick-release lever. Depress the push pin on the
stem, and slide the stem up until the push pin is visible in
one of the holes in the upright. With the stem at the desired
height, close the quick-release lever so that it is snug
against the upright. If the quick release is not snug, see
ADJUSTING THE QUICK RELEASE on the next page.

Thumb Tab

Rear Brake

Stem

Quick Release

Handle

Push Pin

Upright

Reviews: