Spicles BIGGEST, Instruction Manual

Page: 7 / 18

6
Daily checks
To ensure the safety, make the following functional checks before driving:
1. Normal operation of the light, brake and power cut system
2. Tire pressure (low pressure, will influence both autonomy and speed).
3. Wheel axel tightening.
4. Battery charging level
5. Braking system adjustment.
Battery charging
Charging tips
1. The battery pack should be recharged after each use. There is no memory effect so you can charge the
battery after short periods of use without damage.
2. The battery can be recharged on or off the bike.
3. Remove the battery by turning the key and then pulling forwards and upwards carefully until the pack lifts
off.
4. The charger will automatically stop once the battery pack is full.
5. Always charge in dry conditions and indoors away from direct sunlight.
6. Check charger cables, charger, and battery for damage before beginning each charge.
With the battery removed
1. When the battery is removed, do no t touch the “+”and“ - ”contacts, especially with wet hands or metalic
objects.
2. Do not recharge the battery in the inverted position. If you do, you risk drastically reducing it’s lifespan.
3. Place the charge in a flat, secure place, and connect the output plug to the socket in the battery box.
4. Then, connect the input plug (110V/220V terminal) to the power outlet, and the charging will start.
5. After the charging has finished, first, unplug the input plug (terminal 110V/220V), and then the output
plug.
When the battery is charging on the bike
1. Switch off the power.
2. Plug the output lead of the charger into the socket of the battery case.
3. Plug the AC power input plug into the 110/220 volt household power socket to start charging.
4. After charging unplug from the wall outlet first and then from the bike charger socket.
NOTE: Always charge your battery at temperatures between 50 and 80 degrees Farenheit and battery is not
damaged before charging.