10
Installing SIM Card and Battery
Your device is provided with two SIM slots for two different SIM cards. In order to install
battery and SIM card in the device, please follow the steps mentioned below:
Remove the back cover of the device.
Hold the device with front facing downwards; pull battery cover.
Insert the SIM cards in the device.
Attach the battery.
Push the battery cover until it clicks into place.
Installing Memory Card
Your device supports T-Flash card, which is a multimedia memory card used to multiply
the memory of the device. The T-flash card is small and should be pulled out and
installed carefully and prudently in order to avoid any kind of damage. Please follow the
steps mentioned below to install the memory card in the device:
Switch off your device.
Remove the battery cover.
Slide the T-Flash card into the slot and attach the battery.
Push the battery cover until it clicks into place.
Charging the Battery
The device prompts a warning tone and message stating insufficient battery when the
battery power is low.
Please follow the instructions mentioned below to charge your device:
Plug the connector of the charger into the jack of the device.
Plug the charger into a standard AC wall outlet.
Charging…….
Fully Charged…….
You must fully charge the battery before using the device for the first time. It is
recommended to charge the battery for three hours before using the device for the first
time.
2 . 2 P O W E R I N G O N / O F F T H E D E V I C E
Turning On the Device
After installing the SIM cards and charging the battery, you are now ready to turn on
your device.
Long press and hold the Power Key to turn on the device.
