17
10. Install the pump head (12) (sometimes called pump casing):
A.
Prepare the pump head clamp (13).
• Apply food grade anti-seize to the threads on the hand nut.
• Adjust the hand nut open so the threaded rod can swing through the receiving side of the
clamp.
B.
Install the pump head gasket (11).
C.
Present the pump head (12) to the backplate/adapter (1) using a laser or bubble level on the
discharge port to ensure orientation is correct.
FIG. 14 - PUMP HEAD, CLAMP, GASKET
FIG. 15 - PUMP HEAD WITH GASKET INSTALLED
\\ASSEMBLY INSTRUCTIONS - SP41
Summary of Contents for SP41
