USER MANUAL
Page
29
•
Rectangular areas can be set to display the Maximum, Mean or Minimum
temperatures. Press the
M Key
to bring up the main menu, then press the
▼
Key
to
highlight and select the Setup option, then select “Analysis” by pressing the
M
or
OK
Keys
.
•
Under the heading named “Area”, you can toggle between “Min”, “Mean” and “Max”
by pressing the
◄
or
►
Keys
and confirm the selection by pressing the
M
or
OK
Keys
.
•
It is possible to toggle between one and four measurement areas. Choose the
heading named “Mul Spot/Area” and toggle between “on” and “off” by pressing the
◄
or
►
Keys
, then confirm the selection by pressing the
M Key
. Note, only one area is
present in the “off” position.
•
Press the
C Key
to exit and return to the saved image.
Note:
•
Pressing the
•
Key
Key
Key
Key
switches between two modes, for changing area location
and for adjusting area size. Under each mode, pressing the
•
Key
Key
Key
Key
will switch
back to the other.
•
The beginning size of the rectangular temperature measurement areas
displayed is the minimum size available and cannot be reduced by the
operator.
Isotherm Sub-menu
•
The Isotherm procedure can be performed on live, captured and saved images.
•
Press the
M
or
►
Keys
to enter the “Analysis” menu. Press the
▼
Key
to highlight
and select “Isotherm”, then confirm the selection by pressing the
M
or
OK Keys
.