For enter to the mode of sensitivity level change it is
necessary to be convinced that the instrument is
switched off. Then to click and retain in the clicked
status at the same time the «MODE» and «SENS»
buttons. To turn on the instrument during the
«MODE» and «SENS» buttons are pressed. To retain
all three buttons clicked until the LED "CHARGE/
DISCHARGE" lights up. To release all the buttons. The
instrument is in the mode of sensitivity level change
now. In order to increase the sensitivity of the
instrument, the
«SENS» button has to be clicked. To
reduce -
«MODE» button has to be clicked. Each
indication of a LED "/2" means a single offset of
response level. In case of the sensitivity change limit
is reached (in the bigger or smaller direction), the LED
"/2" lights up and doesn't turn off. The further
change of sensitivity isn't possible in this direction.
In the mode of sensitivity level change, the luminous
and sound indications of metal presence are operated.
These indications allow to set the required sensitivity
level without quitting the mode. After achievement of
the required sensitivity level, the instrument needs to
be switched off. At the same time, the current value of
sensitivity will be saved in a non-volatile memory of the
instrument. The saved level of sensitivity will be set
automatically after switching on of the instrument in
the operating mode.
If the complete set of the instrument includes the
charging device and the rechargeable battery, please
study this section of the instruction. The charging
device (220\12V.) may be includes in the modification
of the instrument (current at least 50mA) which is
intended for charging of the rechargeable battery. For
rechargeable battery charging it is necessary to
connect the instrument to the charging device (any
side), thus on the instrument the «Charge» indicator
will light up. Full rechargeable battery charging requires
no more than 16 hours, not full charging is also allowed.
Increase in sensitivity
(for sensitivity level change mode)
Metal Detector
Operation and maintenance instruction
Vortex-S
Warranty period of operation - 24 months from the
moment of sale, a warranty period of storage - 6
months from the moment of production. During a
warranty period the manufacturer is obliged to make
repair or replacement of the instrument free of charge if
during the specified term the consumer finds the
defects or failure which arose because of the
manufacturer. Gratuitous repair or replacement of the
instrument is made on condition of observance by the
consumer of service regulations.
Decrease in sensitivity
(for sensitivity level change mode)
Warranty
Rule of a charge of rechargeable battery
Change of sensitivity level of the instrument
