SPHINX
Project Two Mk2
9
6. SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Project Two, but of all
other Sphinx equipment.
Only the following buttons and indications of the
Remote apply to the Project Two (the others will not
function):
Buttons and LED indication
1.
PRE-AMP:
To select the amp. All buttons
pressed hereafter will only control the amp
functions. The buttons TUNER and CD will
have no effect on the amp.
2.
STANDBY:
Use this red button to switch the
Project Two to stand-by.
3.
:
Pressing this green button mutes the
outputs (temporarily) and you will not hear any
sound. The red LED will be illuminated.
Another press on this button un-mutes the
outputs.
4.
TAPE/MONITOR:
Use this button to select the
Tape IN input. Pressing this button has the
same effect as pressing the TAPE button on
the front panel.
Note: The LED of the selected input (see 5.)
will remain illuminated.
5.
1 - 6:
To select inputs CD SYM to LINE 3
(
Note: 7 to 0 do not function
):
1
CD SYM balanced CD input
2
CD
unbalanced CD input
3
TUNER Tuner
4
LINE 1
unbalanced line input 1
5
LINE 2
unbalanced line input 2
6
LINE 3
unbalanced line input 3
6.
ñ
button:
Pressing this button has the same
effect as clockwise rotating the VOLUME
control on the front panel. You will increase the
volume.
7.
ò
button:
Pressing this button has the same
effect as anti-clockwise rotating the VOLUME
control on the front panel. You will decrease
the volume.
