SPHINX
Project Ten Service Manual
6
5. SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Project Ten, but of all
other Sphinx equipment.
Only the following buttons and indications on the
Remote apply to the Project Ten (the others will not
function):
Buttons and LED indication
1.
PRE-AMP
: To select the amp. All buttons
pressed hereafter will only control the amp
functions.
The buttons TUNER and CD will have no effect
on the amp.
2.
STANDBY:
Use this red button to switch the
Project Ten to stand-by.
3.
: Pressing this green button mutes the
outputs (temporarily) and you will not hear any
sound. The red LED will be illuminated. Another
press on this button un-mutes the outputs
4.
TAPE/MONITOR:
Use this button to select the
Tape IN input. Pressing this button has the
same effect as pressing the TAPE button on the
front panel.
Note: The LED of the selected input (see 5.) will
remain illuminated.
5.
1 - 4
: To select inputs CD to Line 2 .
1
CD
2
Tuner
3
Line1
4
Line 2
6.
ñ
button: Pressing this button has the same
effect as clockwise rotating the VOLUME control
on the front panel. You will increase the volume.
7.
ò
button: Pressing this button has the same
effect as anti-clockwise rotating the VOLUME
control on the front panel. You will decrease the
volume.
