SPHINX
Phono Equaliser
5
Rear panel
2.
R IN
: Connect to this input the
right
(red) output
cable from the turntable.
L IN:
Connect to this input the
left
(white or
black) output cable from the turntable.
3.
Control IN:
Connect here the optical cable from
another Sphinx component’s Control Out
(usually the preamplifier).
4.
GND:
Connect here the separate ground wire
from the turntable.
Also connect here the ground wire from the
(pre) amplifier (if applicable).
5.
Control OUT
: Connect here the optical cable
that goes to another Sphinx component’s
Control In.
6.
R OUT:
Connect this output to the
right
input of
the (pre-) amplifier
L OUT:
Connect this output to the
left
input of
the (pre-) amplifier.
7.
Manufacturer’s label:
This shows important
data for the component, such as serial number
and mains power voltage.
8.
Warning!:
This shows important information
about the safety regulations for this equipment.
9.
AC IN
: Connect the mains cable to a mains
power outlet (100 - 240 VAC).
The mains fuse is placed behind the cover.
O / I
: Mains power switch.
