SPHINX
Myth 9 Service Manual
9
5. THE SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Myth 9 but also of all
other Sphinx equipment.
Only the following buttons on the Remote apply to
the Myth 9 CD player (when pressed the »
(((O
« will
light in the lower left-hand side of the display), the
other buttons will not function:
Buttons
1.
CD
: To select the CD player. All buttons pressed
hereafter will control only the CD player
functions.
Note
: The TUNER and PRE-AMP buttons will
not function.
2.
STANDBY:
Only works if you use a Sphinx
(pre-)amp and the Myth 9 is connected via the
optical cable
3.
MUTE
:
Only works if you use a Sphinx (pre-)
amp, you don’t have to pre-select PRE-AMP.
4.
1 - 0
: With these numbered buttons you may
select each CD track directly. To input a two digit
number (e.g. 16): shortly depress the button for
the first digit (the display shows »
1—
«) and
immediately select the second digit (
6
). If you
wait to long the player will select track 1.
Example
: To select track
16
press
1
and
6
.
5.
ñ
ñ
/
ò
ò
VOLUME
:
Only work if you use a Sphinx
(pre-)amp, you don’t have to pre-select PRE-
AMP.
6.
BAND
: This button has the same function as the
OPEN button on the front panel (12).
7.
STOP
: This button has the same function as the
STOP button on the front panel (3).
8.
PAUSE
: This button has the same function as
the PAUSE button on the front panel (6).
9.
PLAY
: This button has the same function as the
PAUSE button on the front panel (6).
10.
PREV. TRACK:
This button has the same
function as the PREV button on the front panel
(5).
11.
REV. SEARCH
: This button has the same
function as when you hold the PREV button (5)
depressed.
12.
FWD. SEARCH
: This button has the same
function as when you hold the NEXT button (4)
depressed.
13.
NEXT TRACK
: This button has the same
function as the NEXT button on the front panel
(4).
2
3
1
4
5
6
9
13
12
8
7
10
11
