SPHINX
Myth 11 Service Manual
9
7. PROBLEMS AND SOLUTIONS
At the moment of writing the Myth 11 has one
known specific problem.
If in the future you encounter any problem(s) you
may enter the info in this table. This table can then
be used for future reference.
Please also send (by fax or e-mail) the specific
information to the
Sphinx International Service
Department
(see page 3): this info can then be
added to the general database to aid others.
Problem
Cause
Solution
Refer to
page…
Protection activates
Temperature of amplifier is too
high
Re-adjust bias
14/15
Hum at the output.
Modified from November 1998.
Cinch input connector not
modified.
Separate the ground from L&R
cinch input and place a 10 Ohm
resistor between.
10
