Jetson Edition
This edition of CamAdapter is based on
.
Important notice
• The software is compatible only with NVIDIA Tegra K1 platform at the moment.
• This version of CamAdapter supports DJI Zenmuse X3/X5/X5R/XT/Z3 only.
• DJI Zenmuse Z30 is supported using a
. Note that the current hardware
design does not suppose this adapter to be mounted. One needs to develop a custom
design in order to connect Z30.
• Tested with DJI Zenmuse X3/XT/Z3.
Contents
CamAdapter consists of:
• Embedded computer:
• CAN-Bus adapter:
• DJI Zenmuse connection: Mounting board from
Zenmuse Gimbal Mounting Bracket
• DC-DC converter: LM2596 based, +12VDC, 3A output
• M3 screws, bars, and nuts
Also you need to manufacture some case parts:
• 1x Box (
)
• 1x EMUC spacer (
)
• 4x Ear spacer (
)
• 1x Top board (
• 1x Bottom board (
• 4x Ear board (
)
Diagram
Jetson Edition
CamAdapter Assembly Manual
Copyright © 2017, SPH Engineering
4
