background image

05

SPEX SEAT BASE USER MANUAL

4

WWW.SPEXSEATING.COM

Check that the hardware is working correctly, if not you must replace immediately. Spex Seating 
recommends that all fasteners be checked for wear, such as loose bolts or broken components every 6 
months. Loose fasteners should be retightened according to the installation instructions. Contact your 
authorized Spex Seating supplier immediately to replace any broken components. Do not continue to use 
the system after identifying loose or broken components. The expected lifetime of the Seat Base is 5 years.

Cleaning the Seat Base

Seat Base may be wiped clean with mild detergent and water. Dry thoroughly after wiping.
If you have any additional questions regarding cleaning procedures, please contact your authorized Spex
Seating dealer.

Maintenance & Cleaning

Disposal & Recycling

Your Spex Seating System is manufactured using a variety of materials, of which most can be recycled.

Once it reaches the end of its life, if you are the legal owner, do not dispose of as ordinary household

waste but take your Spex system to an approved recycling or collection point, to dispose of according to

local laws and regulations.

Separate collection and recycling of the Spex System when disposing ensures protection of the environ-

ment and assists with natural resource conservation. 

Part

Procedure

Safety check

All components to be checked for signs of stress or cracking.

Seat Base

Check for signs of stress or cracking. If any stress/cracks are found the 

Seat Base is to be condemned and must be disposed of. Clean the Seat 

Base with a mild detergent and quality disinfectant ensuring all areas are 

free from grime.

Hardware and Components Ensure the mounts are in place and in safe working order. If any are miss-

ing, they must be ordered. Check for signs of stress or cracking. If any 

stress/cracks are found these parts must be condemned and replaced 

immediately.

Reissuing to another user

 

Once the user has finished using the Spex Seat Base, it must be refurbished if it is issued to another user. 

Below are the strict guidelines for refurbishing the Spex Seat Base. Spex takes no responsibility for con-

tamination, cross infection, or damage.

Summary of Contents for 1008 Series

















Reviews: