Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 522 / 531

Annex A – Static Site ECDIS User Guide
Annex A-2 65900012
Features not available to a Static Site
The following table lists the features which are available in a standard
radar/chart radar installation, but not available to a Static Site facility.
Feature Additional details
Sensor Data
Display
The only sensor data type available is Static Heading,
which defaults to 000.0. Speed/course and set and
drift values unavailable.
Routes Routes are not available for Static Site.
Trial Manoeuvre Trial Manoeuvre is not available for Static Site.
Display Settings
Ownship synthetics data and Next Turn EBL data
unavailable. Only Latitude/Longitude (L/L) grid
available in Display Settings.
NAV Tools
The following NAV tools are unavailable:

Lines Of Position

History Tracks

Anchoring

Man Overboard
Position Data
Static Position Only. Own ship dead reckoning and
position offset unavailable.
Target Display
Functions Target Autodrop or Echo Reference selection
unavailable.
Target Limits and
Settings
Bow Crossing limits and settings unavailable.
Own Ship AIS Own ship AIS data unavailable
Wide Screen Monitors on Static Site
When using a wide screen monitor in a Static Site set up, the left side of
the screen will display an Alerts Side Panel. This panel has similar
functionality to the Central Alert Management function, see Chapter 7-
Alerts, but cover only those Alerts relevant to the local Static Site node.