Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 70 / 132

056376/A Analogue Compass Repeaters
7-4 Viewing Error Information in SUSI
Error IDs and Descriptions
Table 7-1:
Analogue repeater
error IDs
ID description text cause corrective action
group 100: general errors
108 "SPI/FRAM I/O Er-
ror" unable to read/
write configuration
settings Cycle power.
Re-enter configura-
tion parameters via
SUSI.
If error persists,
send return re-
peater to Sperry
Marine for ex-
change.
group 400: data I/O errors
430 "no message re-
ceived" no data at input Check that valid
data is present at
the input.
450 "timeout gyro head-
ing" gyro heading lost
or invalid while
gyro is active
source Check that valid
gyro heading data
is present.
451 "updaterate gyro
heading too low" gyro heading up-
date rate < 1 Hz Check gyro mes-
sages for invalid
data or checksum
faults.
Increase update
rate at source.
452 "timeout magnetic
heading" magnetic heading
lost or invalid while
magnetic compass
is active source Check that valid
magnetic compass
heading data is
present.
453 "updaterate mag-
netic heading too
low" gyro heading up-
date rate < 1 Hz Check magnetic
heading messages
for invalid data or
checksum faults.
Increase update
rate at source.
454 "timeout thd head-
ing" THD heading lost or
invalid while THD is
active source Check that valid
THD heading data
is present.
455 "updaterate thd
heading too low" THD heading up-
date rate < 1 Hz Check THD mes-
sages for invalid
data or checksum
faults.
Increase update
rate at source.
460 "error in received
NMEA message" received data out of
range or not well-
formed Check whether all
messages contain
proper data.