SPERONI STP Essentia, Quick User Manual

Page: 7 / 20

7
Essentia quick user reference
© Speroni spa . All Rights Reserved 764500110-00
For drilling tools you need to measure the overall length at center.
Measuring a drilling tool
1. Move the machine in order to have the top center point of the tool in the FOV.
2. In order to measure in the best way, you need to use the MaxP function.
This special function allows, while rotating the spindle, to generate the biggest profile of the tool.
Switch on the MaxP using the dedicated button on the display axis.
3. Rotate the spindle by 360 degrees.
4. In most cases you can use the automatic measurement but, if needed, you can use a macro for measuring, for example, the
theoretical intersection point of the drill.
If you need so, select the macro number 010 in the SVS Macro list.
If the Macro 010 is not in the list as shown above, click on the big macro area to show the macro search menu, type “010” and
press “Ok”
The SVS Macro list will only show the macro you are looking for.