background image

 

Titmus V4 / Titmus V2 

Cleaning / Storing the Instrument 

 

 

See accessory case provided with the instrument.  

 

Lens cleaning towlettes are supplied for cleaning the viewing lenses. Fog cloths are supplied to prevent the 
viewing lenses from fogging. 
 
CAUTION: DO NOT PUT FINGERS IN EYES OR MOUTH AFTER USING THE CLEANING TOWLETTE OR FOG CLOTH. 
Eye Contact: wash eyes with cold water, get fresh air 
Skin Contact: wash with water 
Ingestion: Gastric irritation and vomiting. Do not induce vomiting, give plenty of water and consult a physician. 
Prevent aspiration of vomited material induced by ingestion of product. 
After first aid, get appropriate in-plant, paramedic, or community medical support. 
Refer to MSDS sheets for both products for detail information. MSDS sheets are available upon request. 

 

 

Soft foam headrest may be repeatedly cleaned using a 
disinfectant solution. This practice is recommended 
between the testing of each subject. 

 

The exterior of the instrument may be easily cleaned 
with a soft cloth dampened in a mild solution of soap 
and water. 

 

Test Slides are in a completely enclosed module, hence 
cleaning is rarely required. If required, slides may be 
cleaned utilizing a household-type glass cleaner. 
Remove slides before cleaning. Do not use abrasives as 
they will damage the slide. 

 

Do not immerse slide in cleaning solution. Dampen soft 
cloth with solution and gently wipe clean. Dry the slides 
with a soft cloth or tissue. 

 
Dust Cover: Use dust cover to protect the instrument and prevent dust accumulation when not in use. 
 
 
 

Maintenance of the Vision Screener 

 

Recommended Service Schedule 

 

Clean/disinfect the headrest foam: 

AFTER EACH PATIENT OR AS REQUIRED 

 

Clean the front surface of the unit: 

AFTER EACH PATIENT OR AS REQUIRED 

 

Inspect 

Instrument: 

  DAILY 

 

Clean front test lens:   

 

DAILY 

 

Clean outside of instrument: 

 

WEEKLY 

 

Clean test slides: 

 

 

MONTHLY 

 

Replace 

Light 

Module: 

  AS 

INDICATED BY THE CONTROL PANEL OR IF TESTS SEEM VERY DIMLY LIT 

 

 

Replacing Light Module 
 

Please contact a Service Center for replacing the light module. To find out your nearest Service Center, please call 1-800—
446-1802 or +1-804-452-5200. 
 

Page 18

 

  

Summary of Contents for Titmus V2





























Reviews: