9
MEASUREMENT PROCEDURES
• Press
key turn on the meter, press
turn
key again to
OFF
the meter.
• Press
key to select milli-gauss (mG) or
micro-tesla (µT)
• Position the front of the meter to measure the
electromagnetic waves.
• Read the measured value. When manual range
select mode. LCD will shown the
®
mark. The
display of “OL” on the highest position indicates
there is an overload on the reading. Press
to select a higher range for measurement again.
• This meter displays the default value is triaxial
total magnetic field reading, press
key to
independent three single-axis magnetic field
readings and triaxial total magnetic field reading.
• To permanently lock and keep the reading
displayed on the LCD, press
or press
again to unlock.
