5
USB CONNECTION (OPTIONAL CABLE REQUIRED)
Plug the 3.5mm cable jack into the meter’s USB output
and the 9-pin connector into the computer’s COM port.
Press the
POWER
button to turn the meter on.
Format: 1 Stop Bit, 8 Data bits, TXXXX.XF, VXXXXFTM,
TXXX.XC, VXXXXMPS
AUTOMATIC SHUT OFF
After about 15 minutes without activity, the meter will
beep 3 times then shut off to preserve battery life.
To disable:
1. With the unit turned off, simultaneously press
the
POWER
and
HOLD
buttons.
2. Release the
POWER
button.
3. When “n” displays, release the
HOLD
button.
The meter will remain on until the
POWER
button
is pressed again.
BATTERY REPLACEMENT
Replace the 9V battery when “LOW BATTERY” is
displayed. In-spec measurements may be made for
several hours after the low battery indicator appears.
