6
MEASUREMENT PROCEDURES
Temperature Measurement
1. Plug the probe into the top of the meter and ensure a water-
proof seal by threading the connection closed.
2. Press the
POWER
button. Temperature readings will appear
on the LCD.
3. The temperature sensor is located at the end of the metal
temperature probe. To ensure accurately readings insert the
probe at least 2” into the substance being measured.
°C/°F
Press the
°C/°F
button to select the temperature scale. “°C” or “°F”
will appear on the LCD.
Backlight
Press the backlight button to turn the back light on / off.
Hold Mode
1. Press the
HOLD
button during measurement to freeze the
Temperature display. “HOLD” and the temperature are shown.
2. Press
HOLD
button again to exit this mode.
Note...
While in Hold function
REL, MAX/MIN/AVG
and
°C/°F
keys are
disabled.
Maximum/Minimum/Ave Mode
1. Press
MAX/MIN/AVE
to enter the MAX/MIN/AVE mode. “MAX”
appears on the LCD and the meter will now begin storing the
maximum, minimum and average values. Current temperature
appears in the large upper display and a continually updated
maximum (peak) temperature appears in the smaller lower
display temperature
