7
SETUP
Battery Installation
This thermometer uses one 9V battery. To install the
battery before first use:
1. Flip open the battery cover, located on the hand
grip, using one of the two finger tabs.
2. Carefully install a 9V battery into the snap closure,
ensuring correct polarity.
3. Tuck the battery back into the handle without
pinching the wires.
4. Flip the battery cover closed.
Replace the batteries when the low-battery icon
appears on the LCD.
Note…Before replacing the batteries, turn the
thermometer off.
Turning the Thermometer on and off
1. Press
to turn the meter
on
.
2. Press
again to turn the meter
off
.
Changing the Unit of Measure:
1. Turn the thermometer
on
.
2. Press
°C/°F
to toggle between °F and °C.
