Sper scientific 800036 Instruction Manual Download Page 9

 

- 20 - 

 

LCD DISPLAY

 

- 9 - 

WBGT  

Wet Bulb Globe Temperature 

A composite temperature used to estimate the effect of temperature, 
humidity, wind chill, and solar radiation on humans.  

TG 

Black Globe Temperature 

Temperature as measured by a black globe thermometer, which 
monitors the effects of direct solar radiation on an exposed surface.  
This temperature is analogous to what you feel when standing in the 
sun.

 

 

TA 

Air Temperature (Ta) 

The standard temperature as normally referenced in weather 
observations and forecasts. 

 

 

 

 

No Display: 

1.  Ensure that you have pressed the 

SET

 button 

for longer than 100mS. 

2.  Ensure that the batteries are in good condition, 

have proper contact, and are in correct polarity.  
When in doubt, replace the batteries.  (Refer to 
“Battery Replacement.”) 

Display Disappeared: 

1.  If the low battery indicator displayed before the 

display disappeared, replace the batteries.  
(Refer to “Battery Replacement.”) 

2.  Disable the Automatic Power-Off function and 

place the unit in Non-Sleep mode.  (Refer to 
“Non-Sleep Mode Selection.”) 

TROUBLESHOOTING 

Summary of Contents for 800036















Reviews: