13
Sampling Time
The sampling time is the time allotted between successive
measurements. To adjust the sampling time (in seconds):
1. Enter the sampling time function from Setup Mode (see
page 10). “SP-t” appears on the LCD.
2. Press ▲ or ▼ to adjust the value (1, 2, 5, 10, 30, 60, 120,
300, 600, 800, 1800, 3600 seconds). Press
ENTER
to
save the value.
SD Memory Card Format
Enabling this function will format the SD memory card to
work specifically with your meter. Formatting the SD card
will erase any previous memory on the card. New SD cards
should be formatted to work with your meter.
1. Enter the SD memory card format function from Setup
Mode (see page 10). “Sd F” appears on the LCD.
2. Press ▲ or ▼ to select yes (format the SD memory card)
or no (do not format the SD memory card). Press
ENTER
to confirm your selection. If selecting yes, “yES Enter” will
appear on the LCD, press
ENTER
again and the meter
will format the SD card.
