Sper scientific 100006, Instruction Manual

Page: 6 / 12

6
UV-C INSTRUCTIONS
1. Turn on the power, placing the items sterilization. Press
the , the indicator will light up. It will be sterilizing for 5
mins after closing the lid. NO time setting required.
NOTE: UV-C function only operates when the lid is closed.
NO water is required for this function.
UVC & ULTRASONIC INSTRUCTIONS
Fill water before use. Please make sure o fill at least 200 ml
of clean water before ultrasonic cleaning.
1. To use both UV-C and ultrasonic functions, please read
the “Ultrasonic Cleaning and UV-C Sterilization”
procedures.
2. Put the items to be cleaned and sterilized into the tank.
3. After the power switch is turned on, close the lid and
press , and it runs automatically for 5 mins. If you
still need additional cleaning, you can press the to
adjust the time.
4. After use, please turn off the power switch and unplug the
power cord. Drain the waste water from the top or right
side.
5. Wipe the cleaning tank and casing with a dry cloth and
store it in a dry environment at the same time.
WARNING: Do not use this device near a pacemaker patient.