Spendor SR5 Loudspeaker Instruction Manual Download Page 8

SR5IM1.DOC 

 

  Page 8 of 9 

 

7   QUERIES AND SERVICE 

 
If you require advice or service for your audio system please contact your Spendor dealer. We recommend 
that you retain all the packaging for your loudspeakers in case you need to transport them safely in the 
future. 
 
 
 

8   WARRANTY 

 
All Spendor 'S' Series loudspeakers (‘The Equipment’) are guaranteed against defects in components and 
materials for a period of 5 years from date of purchase. Within this period parts will be replaced free of 
charge provided that failure is not due to accident, negligence or misuse. Labour and carriage are not 
covered except by local agreement.  
 
The guarantee offered does not affect the consumer's statutory rights. 
 
To obtain Service under guarantee the equipment together with an original or clear copy of proof of purchase 
must be delivered to a local Spendor dealer or distributor at the owner's expense. 
 
Spendor Audio Systems Ltd and any of its authorised distributors or dealers reserve the right to refuse 
service under guarantee if the equipment has been subject to unauthorised modification or any of the serial 
numbers identifying the equipment have been defaced or removed. 
 
Please register ownership of your Spendor loudspeakers by completing and returning the enclosed 
registration card. This will help us to deal quickly with any queries regarding your equipment. 
 

Summary of Contents for SR5 Loudspeaker










Reviews: