S8e User Manual Sheet 3 of 3
Cable Quality
Loudspeaker cables can have an important effect on sound quality. Choose good quality low resistance cables
with high purity metal conductors and low-loss dielectric (insulation). Ask your dealer for advice on cables to suit
your system and budget.
Loudspeaker Power Rating
The technical specification shows a nominal power rating for your loudspeaker and the figure can be taken as a
rough guide to the power rating (Watts per channel into 8ohm load) for a complementary amplifier. However,
provided you NEVER play at levels were the sound is strained or distorted, the power rating is not critical
provided you have a minimum of about 15 Watts per channel and a maximum of 300 Watts per channel
available. If the sound is strained always turn the playing level down immediately. Ask your dealer for advice if
you are unsure or if you are choosing a new amplifier.
Caring for your Loudspeakers
Spendor’s real wood veneers and solid timber elements should be treated like high quality furniture. Routine
dusting with a soft cloth is recommended. Do not apply any aerosol spray directly as this could damage the
drive units or grille fabric. Dust on the grille cloth can be removed with a sticky roller or a piece of sticky tape or
by gentle vacuuming with a soft brush adaptor. Do not expose the cabinets to damp, widely fluctuating
temperatures or direct sunlight, appearance and performance may suffer. Spendor ‘S’ series cabinets are
finished in natural wood, over time the wood will age and mature, evening out and often darkening the surface
colour while highlighting the natural grain and patina.
Queries and Service
If you require advice or service on your audio system please contact your Spendor dealer. We recommend that
you retain all the packaging for your loudspeakers in case you need to transport them safely in the future.
Warranty
All Spendor ‘S’ Series loudspeakers (The Equipment) are guaranteed against defects in components and
materials for a period of 5 years from date of purchase. Within this period parts will be replaced free of charge
provided that failure is not due to accident, negligence or misuse. Labour and carriage are not covered except
by local agreement. The guarantee offered does not affect the consumer’s statutory rights. To obtain Service
under guarantee the equipment together with an original or clear copy of proof of purchase must be delivered to
a local Spendor dealer or distributor at the owner’s expense. Spendor Audio Systems Ltd and any of its
authorised distributors or dealers reserve the right to refuse service under guarantee if the equipment has been
subject to unauthorised modification or any of the serial numbers identifying the equipment have been defaced
or removed.
Please register ownership of your Spendor loudspeakers by completing and returning the enclosed registration
card. This will help us to deal quickly with any queries regarding your equipment.
Specification Spendor S8e
Description
2 way floor standing loudspeaker
Enclosure type
Spendor 3D linear flow reflex
Drive unit HF
27mm coated fabric dome, damped vented enclosure
Drive unit LF/MF
210mm ep38 polymer cone
Frequency response
44Hz - 20kHz ±3dB on reference axis
Frequency range
-6dB at 32Hz
Dispersion
Within 3dB of response on reference axis
Horizontal over 40
o
arc ± 20
o
Vertical over 20
o
arc ± 10
o
Sensitivity for 1W @ 1m
89dB
Impedance nominal
8 ohms
Impedance minimum
5.0 ohms
Crossover frequencies
4.0kHz
Power handling
15-300 watts into 8 ohms unclipped
Harmonic distortion
< 1% 100Hz-20kHz 90dB @ 1m
Connections
2/3 way gold-plated bi -wirable terminals
Magnetic shieldoing
All drive units shielded
Dimensions H x W x D
925 x 226 x 320mm (36.4 x 8.9 x 12.6 in)
Plinth maximum W x D
316 x 340mm (12.4 x 13.4 in)
Spikes/feet/stand height
37 ± 3mm
Net weight
25.0kg (55.1 lb)
Shipping weight
28.0kg (61.7 lb)
Accessories supplied
Spikes and lock nuts
Cabinet real wood finishes
Cherry, Maple, Rosenut, Black ash
Spendor Loudspeakers are designed and manufactured in the UK by Spendor Audio Systems Ltd
Spendor Audio Systems Ltd reserve the right to alter designs and specifications without notice.
® Spendor is a registered trademark of Spendor Audio Systems Ltd. Kevlar is a registered trademark of DuPont.
© Copyright 2003 Spendor Audio Systems Ltd. All rights reserved.
305VER1.DOC
Spendor Audio Systems Limited
Station Road Industrial Estate
Hailsham
East Sussex
BN27 2ER UK
Tel:
+44 (0)1323 843474
Fax:
+44 (0)1323 442254
Email:
Web Site: www.spendoraudio.com
