Spendor C9e Instruction Manual Download Page 6

309VER1.DOC 

 

           Page 6 of 7 

 

 
3   POWER RATING 

 
The technical specification shows a nominal power rating for your loudspeaker and the figure can be taken as a 
rough guide to the power rating, Watts per channel into 8ohm load,  for a complementary amplifier. However, 
provided you NEVER play at levels where the sound is strained or distorted, the power rating is not critical 
provided you have a minimum of about 15 Watts per channel and a maximum of 250 Watts per channel available.  
If the sound is strained always turn the playing level down immediately. Ask your dealer for advice if you are 
unsure or if you are choosing a new amplifier. 
 
 
 

4   RUNNING-IN 

 
The performance of any loudspeaker will improve subtly during initial use especially if the loudspeaker has been 
stored in a cold environment or not used for an extended period. The drive unit suspension and any damping 
materials will ‘break in’ and settle during the first 24-48 hours of playing. This running-in period may vary. Allow up 
to a week for the loudspeaker temperature to stabilise and a further 48 hours of continual operation for the 
loudspeaker to deliver its full potential. 
 
 
 

5   MAINTENANCE 

 
Spendor’s real wood veneers and solid timber elements should be treated like high quality furniture. Routine 
dusting with a soft cloth is recommended. Do not apply any aerosol spray directly as this could damage the drive 
units or grille fabric. Dust on the grille cloth can be removed with a sticky roller or a piece of sticky tape or by 
gentle vacuuming with a soft brush adaptor. Do not expose the cabinets to damp, widely fluctuating temperatures 
or direct sunlight, the appearance and performance may suffer. The C9e cabinet is finished in natural wood, over 
time the wood will age and mature, often darkening the surface colour while highlighting the natural grain and 
patina. 

 
 

6   QUERIES AND SERVICE 

 
If you require advice or service for your audio system please contact your Spendor dealer. We recommend that 
you retain all the packaging for your loudspeakers in case you need to transport them safely in the future. 
 
 
 

7   WARRANTY 

 
All Spendor 'S' Series loudspeakers (‘The Equipment’) are guaranteed against defects in components and 
materials for a period of 5 years from date of purchase. Within this period parts will be replaced free of charge 
provided that failure is not due to accident, negligence or misuse. Labour and carriage are not covered except by 
local agreement.  
 
The guarantee offered does not affect the consumer's statutory rights. 
 
To obtain Service under guarantee the equipment together with an original or clear copy of proof of purchase 
must be delivered to a local Spendor dealer or distributor at the owner's expense. 
 
Spendor Audio Systems Ltd and any of its authorised distributors or dealers reserve the right to refuse service 
under guarantee if the equipment has been subject to unauthorised modification or any of the serial numbers 
identifying the equipment have been defaced or removed. 
 
Please register ownership of your Spendor loudspeakers by completing and returning the enclosed registration 
card. This will help us to deal quickly with any queries regarding your equipment. 
 

Summary of Contents for C9e








Reviews: