TC-245S
คูมือการใชเครื่อง
A. PREPARATION
(1) CHRGING THE BATTERY PACK
A. After purchasing or extended storage (more than 2 months), the
battery can not reach its maximum capacity for the first time
recharging.
After repeating the charging/discharging the battery two or three
times, the capacity will reach its best status.
B. Slide the battery pack or the transceiver with the battery pack into
the charger. Make sure the battery pack contacts are in charging
terminals ,the charger LED turn to be red and charging begins. The
red LED will disappear and turn to be yellow if the charging is full.
(2) INSTALLING/REMOVING THE BATTERY PACK
A. Match the two troves of the battery pack with the corresponding
guides on the back of the transceiver. Slide the battery pack along
the back of the transceiver until you hear *
kata
*.
B. To remove the battery pack, turn the transceiver off first ,then push
the release latch on top and slide the battery pack down.
(3) INTSTALLING THE ANTENNA
Hold the base of supplied antenna, and let it insert connector on the top
panel of the transceiver, then screw clockwise until secure.
(4) INSTALLING THE CLIP
Match the belt clip with the corresponding grooves on the battery and
slide down the belt clip. Toe remove the belt clip, slide up the belt clip
using you hail or tools.
(5) INSTALLING THE SPEAKER/MICROPHONE
Turn counterclockwise screw and unover the Mic’s cover, then Insert the
speaker/microphone plugs into the speaker/microphone jacks.
Summary of Contents for TC-245S
Page 11: ...TC 245S คู มือการใช เครื อง ...