Spellman High Voltage Electronics Limited - Company Confidential
This document must not be copied or distributed without express permission from Spellman High Voltage Electronics Limited
81408-4r2 MPD Series Installation and User Guide
Page 4 of 29
1.
Unit Description
The MPD range of high voltage 2.5kV to 30kV dc-dc converters produce a high performance
dc output for a wide range of instrumentation and analytical applications. The combination of
linear and switch mode power conversion techniques provides low noise and high
efficiency. The unit also offers excellent ripple levels and stability.
The units are designed for operation from a 24V dc input and will supply up to 10W of output
power.
The signal and power inputs and outputs are via a 15 way male ‘D’ connector.
The HV output is via a 1m long un-terminated HRG58 screened cable, other lengths up to
5m can be requested, please consult with factory.
The part number for a given unit describes its characteristics:
MPD 15 N 10 / 24 / XXXX
Model type
Max o/p kV
Polarity
Max o/p
power (w)
Input voltage
Options
