SPEL Smart4house RE-00 Series Installation And Operating Instructions Manual Download Page 12

Page: 12 / 18

S4H-RE-00, S4H-RE-10

5.a. In the main menu, select

Email messaging

5.b. If you want messages to be sent to Email, check

Email

Messaging

and save by pressing

Save

If you want to remove E-mail address from the cloud, press

Remove email

Pressing

Remove

email

will get you to the following screen 5.c.

Note: Button

Choose device

is showed only if the

Email

Messaging

is allowed.

5.c. For your E-mail to be removed from the cloud, write down
your E-mail and press

Remove

. A verification message will be

sent to that E-mail address for removing your address from the
cloud.

Use the above address removal procedure if you reinstall the
application or replace you Smartphone/Tablet. The same address
cannot be saved in the new application until it has been removed
from the cloud.

Summary of Contents for Smart4house RE-00 Series



















Search results

Summary of Contents for Smart4house RE-00 Series

Reviews:

Related manuals for Smart4house RE-00 Series

Brands by name

Popular brands

SPEL Smart4house RE-00 Series, Installation And Operating Instructions Manual

Search results

Summary of Contents for Smart4house RE-00 Series

Reviews:

Related manuals for Smart4house RE-00 Series

Brands by name

Popular brands