background image

EN

FCC Information

FCC ID: BRWSPMSR4000T 

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules.  These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment to an outlet on a circuit different from that to 
which the receiver is connected.

This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation. 

NOTICE: 

Modifications to this product will void the user’s authority to operate this 

equipment.

This product contains a radio transmitter with wireless technology which has been 
tested and found to be compliant with the applicable regulations governing a radio 
transmitter in the 2.400GHz to 2.4835GHz frequency range.

 

Warranty, Service and Customer Service Contact Information

Country of 

Purchase

Horizon Hobby

Contact Information

Address

United States 

of America

Horizon Service 

Center

(Repairs and Repair 

Requests)  

servicecenter.

horizonhobby.com/

RequestForm/

4105 Fieldstone Rd 

Champaign, Illinois, 

61822 USA

Horizon Product 

Support

(Product Technical 

Assistance)

productsupport@

horizonhobby.com.

877-504-0233

Sales

websales@

horizonhobby.com

800-338-4639

EU

Horizon Technischer 

Service

service@horizonhobby.

eu

Hanskampring 9

D 22885 Barsbüttel, 

Germany

Sales: Horizon Hobby 

GmbH

+49 (0) 4121 2655 

100

Summary of Contents for SR4000T













Reviews: