background image

EN

8

Receiver Power System Requirements

Inadequate power systems that are unable to provide the necessary minimum 
voltage to the receiver during flight have become the number one cause of 
in-flight failures. Some of the power system components that affect the ability 
to properly deliver adequate power include:
•  Receiver battery pack (number of cells, capacity, cell type, state of charge) 
•  The ESC’s capability to deliver current to the receiver in electric aircraft
•  The switch harness, battery leads, servo leads, regulators etc.

The AR6335 has a minimum operational voltage of 3.5 volts; it is highly 
recommended the power system be tested per the guidelines below. 

Recommended Power System Test Guidelines

If a questionable power system is being used (e.g. small or old battery,  
ESC that may not have a BEC that will support high-current draw, etc.),  
it is recommended that a voltmeter be used to perform the following tests.

The Hangar 9

®

 Digital Servo & Rx Current Meter (HAN172) is the perfect tool to 

perform the test below. 

Plug the voltmeter into an open channel port in the receiver and with the 
system on, load the control surfaces (apply pressure with your hand) while 
monitoring the voltage at the receiver. The voltage should remain above 4.8 
volts even when all servos are heavily loaded.

 CAUTION:

 The latest generations of Nickel-Metal Hydride batteries 

incorporate a new chemistry mandated to be more environmentally 
friendly. These batteries, when charged with peak detection fast 
chargers, have tendencies to false peak (not fully charge) repeatedly. 
These include all brands of NiMH batteries. If using NiMH packs, be 
especially cautious when charging, making absolutely sure that the 
battery is fully charged. It is recommended to use a charger that can 
display total charge capacity. Note the number of mAh put into a 
discharged pack to verify it has been charged to full capacity.

How QuickConnect

 Technology Works

•  When the receiver voltage drops below 3.5 volts, the system ceases to operate.

•   When power is restored the receiver immediately attempts to reconnect. 

•   If the transmitter was left on, the system reconnects typically in about  

4/100 of a second.

QuickConnect is designed to allow you to fly safely through most short duration 
power interruptions, however, the root cause of these interruptions must be 
corrected before the next flight to prevent a crash. 

ModelMatch

 Technology

Some Spektrum and JR transmitters offer a patent pending feature called 

ModelMatch. ModelMatch technology prevents the possibility of operating a 

model using the wrong model memory, potentially preventing a crash. With 

Summary of Contents for AR6335















Reviews: