manualshive.com logo in svg

Speeka F10F Series, User Manual

Share
Download
Speeka F10F Series User Manual Download Page 11

F10F Series  Booster User’s Manual 

 

- 

10

 - 

6.2.4.  The connectors connection confirmation  

?

  Please confirm the connectors are very well connected between the donor antenna, 

cable, booster and the server antennas. 

6.3.   Booster Installation 

6.3.1.  Method of Installation 

The F10F can only be mounted indoors. The booster is fixed onto the wall through 

expansion bolts. 

A.  Drill holes on the selected place and install expansion bolts. 

B.  Align the holes on the installing support with the expansion bolts, keep the installing 

support vertical, place flat washers, spring washers, and nuts in turn, and tighten the 

nuts to fasten the installing support.  

C.  Place the booster on the support and fasten it. 

D.  Connect cables and power cables to the booster respectively. 

E.  After installing the booster as described as above, power on the booster to check the 

operation status.  

 

 

The figure showing how to install F10F-DB 

 

Summary of Contents for F10F Series



















Reviews:

No comments

Brands by name

Popular brands

Load more brands