Speedtech 68-74 X-Body, Instructional Manual

Page: 4 / 6

Aluminum Body Mounts
Page 4
1.0 GENERAL INFORMATION
Back to Table to Contents
1.1 This Guide
Thank you for purchasing your new Speedtech Performance Aluminum Body Mounts. These instructions
outline the Aluminum Body Mounts that will be installed with the Speedtech Performance ExtReme or a
factory Subframe.
1.2 Tools
Installation of the Speedtech Performance Aluminum Body Mounts can be done on the floor
with simple hand tools.
Additional things to have before you start:
•
Wrench
•
Jack Stands
•
Anti-Seize
•
Post Lift (If possible)
2.0 CHECK IN PARTS AND HARDWARE
Back to Table to Contents
2.1 Checking in the Order
Best practice will be to check in your order as soon as possible after receiving the order. To check
in the order we have provided tables, these can be used as check lists for your order.
2.2 Check in Tables
X # Description Size
2 Radiator Support Mounts (Upper and Lower Set) 1 Groove
2 Body Mount (Mid Position) 2 Groove - Larger
2 Rear Body Mount 2 Groove
2 Front Radiator Support
– Bolt
1/2 x 3 NF
2 Mid Position - Bolt 5/8 x 4 NC
2 Rear Position
– Bolt
5/8 x 3 ½ NC
2 Nylock Nuts 1/2
4 Washer
– Flat
½
4 Washer
– Flat
5/8
4 Washer
– Lock
5/8
Note:
There may be some extra hardware that was packaged that is not accounted for in the
check list. The hardware kits are made to fit multiple products and the excess is from that
process.