4
gamepad button 1
Confirm the center position. Press button 1
When the calibration procedure has been successful, click “Finish“ to
return to the “Game Controller Properties” page. *
Click “Test“ to open the test menu. Please turn the D-pad and press
each button on your gamepad to test the gamepad adjustments. If all
functions are correct, click “ OK”.
(If the gamepad does not work properly, it means that the
above calibration is uncompleted yet. Calibrate the joystick
step-by-step again until the above procedure is exactly per-
formed.)
Open the Game Controller “Properties” page and click “OK“ or
“Apply” to complete the calibration procedure. *
Finally, you are ready to start the game with this beautiful and power-
ful gamepad.
Attention:
Once the gamepad has been properly plugged to your PC but does not
to work, please enter the Game Controllers page and select “Advanced “
page to check whether this SL-6508 Intruder is the “Joystick 1” or not.
If there is only one game controller connected to your PC, this
Gamepad must be absolutely the “Joystick 1” to work properly. If this
SL-6508 Intruder is not the “Joystick 1”, please remove it from the
“Game Controllers” menu, as well as other installed joysticks.
Subsequently re-install the SL-6508 Intruder and complete the calibra-
tion procedure, then it will work as usual.
INTRUDER Manual.qx 07.11.2001 9:43 Uhr Seite 4
