SpeedLink SL-6350-SGY, Manual

Page: 12 / 40

DE
DK
IT
ES
FR
EN
1
Synchronising with the Receiver
If the mouse does not work then you will need to
synchronise it with the USB receiver.
1. Make sure that the mouse has been fitted with
the correct battery
. The mouse must not be further than 10m away
from the USB receiver
. Press the ID button on the USB receiver (which
should already be plugged in)
. Gently press the ID button on the base of the
mouse with a pointed object.
Charging the Mouse
First, fully charge the supplied rechargeable battery
before using the mouse. The initial charge will take
roughly hours. The time taken for subsequent
charges will vary depending on the remaining
power in the battery. You should place the mouse
in the charging station as soon as you notice the
mouse pointer starting to “jump”. The charging light
on the charging station will light up red when the
mouse is being charged.
NOTE: Other factors may be causing the mouse
pointer to “jump”. Do not use the mouse on
glass surfaces as these are poor at reflecting the
sensor’s light and may affect performance.
NOTE: To charge the battery, Windows
users using notebooks should deactivate the
computer’s Hibernation mode. To do that, open
the Windows Control Panel and click on “Power
Options”. Click on the Hibernation tab and
uncheck the box marked “Enable hibernation”.