D
GB
F
E
I
12
3. The LED on the receiver will go out. When you move the
mouse, the LED flashes.
Note: After changing the batteries, it is necessary to re-estab-
lish the RF link.
7. Software installation
Under Windows 95/98/Me/2000/XP/NT
Make sure no other mouse drivers are already installed or
are already running. To remove such drivers or software, use
the uninstall program belonging to the mouse that is already
installed.
1. Insert the supplied software into the respective drive.
2. Click on “Start/Run/Browse” and select the respective
drive.
3. Double click on the file “setup”.
4. Follow the instructions on the screen.
5. When installation is finished, restart your PC.
6. Double click on the new mouse icon at bottom right in the
taskbar to change the mouse properties or select “Start/
Programs/Tech/Wheel Mouse 5.2” to set the properties
as you wish.
RF button
