D
6
D
GB
F
E
I
D
7
D
GB
F
E
I
Audio connection
Use the figure shown above to connect your stereo speakers.
Connect the 3.5mm cinch plug to one of the following sound
sources:
• Audio output of a sound card
• Audio output of a Mac or any other computer
Please notice: Once the earphone is connected to the earphone
plug, speakers will be set to “mute”.
Controls
1.Power Switch
Press switch once to activate your speaker systems; the
green LED indicator will light up. Pressing switch again to
deactivate the system (green LED indicator will be switched
off).
2.Volume Control
Turn knob clockwise to raise the volume.
Turn knob counter-clockwise to reduce it.
3.Tone Control
Turn knob clockwise for a higher tone or counter-clockwise to
raise the bass effect.
Important Notes
• Do not store the unit in direct sunlight or extreme
temperatures, as this may damage the components.
• Do not open the cabinet. Maintenance and servicing should be
done by qualified personnel only.
• Be careful not to spill any liquids on the unit, as this may
damage the components.
• Do not expose the grid of the unit to any pressure, as this may
damage the components.
• Clean your unit with a dry cloth only.
• There has to be an electric socket near the unit.
Technical specifications
Model No. SL-8102
• Speakers: Broadband Speaker 3” (7,6mm)
magnetically shielded
• Frequency Response:100Khz to 18Khz
• Power Requirement: 230V ~
• Controls: -Main Switch ON/OFF
-Volume Control
-Tone Control
• Signal Input: 3,5mm Stereo Cinch Plug
• Signal Output: Earphone Plug
• Dimensions: 92x185x112mm
Summary of Contents for Proteus SL-8102
Page 10: ...D 18 D GB F E I D 19 D GB F E I...
Page 11: ...SL 8102...
