Page 36 of 55
Steps:
(1) as shown in Figure 5-4, if the user wants to select the source for the layer, the user
should first press BG key, A key, B key in the LAYER key area, and then the selected
layer will show the red layer frame in the preview display.
(2) And then press
FREEZE, 1
～
4, and LOGO/BLACK key in the
PREVIEW or
PROGRAM key area, the user can switch the input source, freeze the picture or transfer
the LOGO or black field.
Tip: When the preview channel and program channel are in the same layer, if the user
switches the preview input source, the layer on the program will be switched to the same
source at the same time.
Seamless Switch
The switch mode for DVX402 has tow kinds, one is CUT, and the other is FADE, the
corresponding keys are FADE key and CUT key in TRANSITION key area. After editing
the picture in the preview display, the user can switch the picture on the preview display to
the program output by pressing CUT key or FADE key.
Figure 5-5 Switch Keys
Set Fade Time and Preview Switching Mode
