SC-CS-100 MAY 10, 2017
4
10.
Turn the water supply on.
11.
Use tablet completely before rinsing.
12.
Rinse the coil until the cleaner is removed.
13.
Turn the water supply off and squeeze the trigger to release the pressure.
Mixing Valve Chart
Dial Setting
Estimated Dissolve
Time CoilShot
Estimated Dissolve
Time CoilShot HD
Full Open
7 minutes
9 minutes
¾
10 minutes
30 minutes
½
14 minutes
45+ minutes
¼
28 minutes
60+ minutes
Note, once the tablet comes in contact with the water, it will start to dissolve.
General Maintenance and Storage
1.
When done using the unit, run clean water through it to remove any chemical
residue.
2.
Protect unit from freezing temperatures. Do not store unit outdoors.
3.
Before storing, remove all water from inside the gun. Do this by disconnecting
the water source, squeezing the trigger, and shaking the water out of it.
NOTE: When storing after use with CoilShot HD, rinse the gun with clean water
for at least 2 minutes before storing.
Troubleshooting
Issue
Probable Cause
Water is not coming out
Make sure the garden hose is connected and water is turned on
and flows freely from the hose.
Trigger is damaged and will not activate.
Water is leaking from the
back of the gun
O-ring in the door is broken or missing and needs to be replaced.
Latch is broken or worn.
Water leaks from the
nozzle
The O-ring in the tip of the gun is broken and should be replaced.
The trigger valve O-ring is damaged.
Nozzle will not secure to
the tip of the gun
The quick disconnect is worn and needs to be replaced.
Chemical is not coming out
The mixing valve is closed and needs to be opened
The tablet has dissolved completely and needs to be replaced.
Full Chemical
1/2
3/4
1/4
