Speed Touch 510v5, User Manual

Page: 55 / 84

47
E-DOC-CTC-20051017-0137 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.5.4 Game or Application Definition
Accessing the Game or
Application Definition
page
Proceed as follows to access the Game or Application Definition page:
1
In the Toolbox menu, click Game & Application Sharing .
2
In the Pick a task list, click Modify a game or application .
3
Click the name of the game or application you want to view/change.
Overview
This page gives you an overview of the port mappings used to allow this service or
game to be initiated from the Internet.
A service consists of one or more TCP/UDP port ranges. Each incoming port range
can be translated into a different internal (local network) port range. Port ranges can
be statically assigned to devices or dynamically assigned using an outgoing trigger.
Configure
Under:
Game or Application Name you can:
Change the name of the game or application.
Game or Application Definition you can:
Change the TCP/UDP port definition for this game or application.
Adding a Port
Translation rule
Proceed as follows:
1
Click the Edit link of the TCP/UDP port definition of the game or application.
2
In the Protocol list, click the protocol the game or application uses.
3
In the Port Range box, type the port range the game or application uses.
4 In the Translate To box, type the port range to which the SpeedTouch™ has to
translate the ports specified under Port Range .
5
If you want to make a dynamic translation rule you must specify a trigger
protocol and port.
6
Click Apply .
Consult the user’s guide or support pages of your application to know which
ports are being used by this application.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger
port, it will activate this translation rule.