background image

-8-

202147

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

Wash Temperature

Hot Water

Hot water will give the best results of cleaning and 
sanitizing, but it is not suitable for all items. It is 
best for sturdy whites and colorfast items, heavily 
soiled items and diapers.

Warm Water

By using warm water, there is less chance of color 
loss in items. Warm water also reduces wrinkling in 
permanent press items. Use with light and 
moderate soils, non-colorfast or dark colors, 
permanent press, silks, woolens, nylon, and acrylic.

Cold Water

Cold water is less effective in cleaning than hot or 
warm water, but it does minimize wrinkling and color 
fading. Use it for washing extra-sensitive clothes 
and for the rinsing of all fabrics.

Energy

You can save energy when washing by following a few 
guidelines:

1. Heating water accounts for the greatest 

energy expense when washing. Save on heating 
water by using warm or cold washes as well as 
cold rinses.

2. Wash full loads, but do not overload.

3. Use soak cycles for heavily soiled items to 

reduce wash times.

4. Select a shorter wash time for lightly soiled 

items.

Wash Temperature Guide

Water Temperature

Use

Comments

HOT

Sturdy whites and colorfast items

Work clothes

Soiled items

Diapers

Best cleaning for heavily soiled 
items

Best for sanitizing

WARM

Rinsing of some items (OPTIONAL)

Light and moderately soiled items

Non-colorfast or dark colors

Permanent press

Silks, woolens, nylon, acrylic

Reduces wrinkling in permanent 
press fabrics

Less fading

Reduces shrinking in knits

COLD

Rinsing of most items

Non-colorfast fabrics

Extra sensitive clothing

Saves energy

Reduces color fading

Reduces wrinkling

Reduces shrinking

Summary of Contents for 202147R2






















Reviews: