MODIFYING
:
Never attempt to drill holes into the shell or cut it. This can damage and
weaken the helmet which will ultimately prevent it from protecting you properly. Also,
removing certain parts takes away from the design and functionality of the helmet all
together, which can also injure a person. In any case of replacing existing parts, please
make sure to contact your dealer.
ALWAYS CHECK
:
Before riding off, always be aware of certain things to keep you safe.
Check to ensure that nothing is loose. Check for cracks or dents. Do not use the helmet
if you find any defects at all. Check the face-shield for any scratches that will impair your
vision. Make sure all the padding is intact and not falling off. Check the D rings and
retention system for any flaws. It’s important that these are intact so you can tighten the
helmet to your head. Ensure that the shield is the right tint for the driving conditions you will
be in. Riding at night with a dark tint is dangerous and very unsafe. It hinders the visibility of
the rider. Be aware of sounds and noises around you. The liners can reduce your hearing
ability. A small opening in the visor can make a difference in how much you hear and see
while riding. Always be aware of your speed, other drivers, and the conditions you are riding
in. As well as your ability to hear sounds such as horns and emergency vehicle sirens.
USE THE FOLLOwING SETS OF INSTRUCTIONS TO LEARN
HOw TO OPERATE THE FUNCTIONS SPECIFIC TO YOUR
HELMET MODEL
DOUBLE "D"
- D-RING RETENTION SYSTEM
1. FEED STRAP THROUGH BOTH "D" RINGS.
2. FLIP STRAP OVER FIRST RING, AND PULL UNDER THE SECOND RING.
3. PULL STRAP TO TIGHTEN UNTIL FITTED COMFORTABLY.
4. FLIP BACK THE END OF THE STRAP, AND SNAP TO FINISH.