Quick start guide for wireless HDMI set
© Speechi 2019 - www.speechi.net - Tel : +33 (0)320 347 425 - Fax : +33 (0)320 347 426
Ref : TEK-HDMI-SF-001-QSG
Ref : TEK-HDMI-SF
Support and downloads:
www.speechi.net/fr/home/support/cle-wi-fi-miroir-hdmi/
Email:
Récepteur
1 –LED indicator
2 – Reset button
3 – USB power input
4 – Pairing button
1. Wait until LED indicators are light-on on both transmitter
and receiver
2. Connexion is automatic and should take about 15 seconds.
During this time, you will see following LED indicators :
When done, both LED stop blinking
Connecting
or
or
Connection of the set
Onscreen status
Receiver
Transmitter
1
2
3
5
4
3
2
1
USB
USB
Blinking blue
Blinking green
Connected
Waiting for device
Pairing failed
Disconnected
No Signal
Signal error
Poor signal
Pairing
Failed to connect
4
If connection failed
(blinking red)
Press reset button on Transmitter and receiver
1. Press pairing button on receiver
2. Press pairing button on transmitter
3. When pairing is finished (about 2 minutes) and
automatically connect (see step 3)
Pairing
To reset the pairing
6
LEDs indicators status
Paring (red blinking)
connection ongoing
(blinking blue)
connection ongoing
(blinking green)
connected
(solid blue)
connected
(solid green)
Connected
Connection
ongoing
Pairing
Receiver
Transmitter
