Paste electrostatic sticker on the
glass, behind the rear-view mirror
is recommended (as shown in the
left figure).
Paste position of
host base
Clean your windshield and put the electrostatic sticker on the
recommended area as shown in the figure. Avoid the edge of
the windshield and select the flat and smooth area for the
installation. Make sure you remove air bubbles between the
sticker and the glass.
1. Insert a TF card into the card slot.
2.Remove the protective film of 3M glue from the back of the
bracket, and paste the bracket onto the electrostatic sticker
in the dotted area. Press the bracket to make sure it is firmly
attached to the electrostatic sticker.
Install the electrostatic sticker.
Stick the camera mount to the windshield.
Step 1
Step 2
Device installation area
