2.3.3 Dash Mount Installation
1. The wire on the back of the device passes through the dash mount
from the hole in the middle of the clip;
2. Push up the snap of the dash mount, align with the hole on the back of
the device, and fix the bracket;
3. Adjust the angle of the screen and lens，Fix the dash mount on the
dashboard;
4. Adjust the angle of the screen and lens.
2.3.3
2.3.4
2.3.4 Device Installation
1. Insert the power cable into the car cigarette lighter, and connect the
other end to the power interface of the device;
2. Use suction bracket or dash mount to fix the device. (Refer to [2.3.2
Suction Bracket Installation] / [2.3.3 Dash Mount Installation]).
2.3.4
01
02
03
04
05
06
07
08
09
10
11
12
13
