6
Installation
Initial Power
-
Up
1.
Open the door and turn the power switch
“
ON
”.
2.
Monitor the LED. You should see the following signals. The
LED will be off for several seconds between these.
•
Long Green to indicate startup is occurring.
•
Fast Green/Amber/Red to indicate startup is com-
plete.
•
Short Amber flash when initial data is sent to Spec-
Connect.
•
Short Green flash indicating the transmission was
successful, or a short Red flash to indicate that it
failed.
3.
Configure the device with one of the two options: Bluetooth
with the WatchDog Mobile app on a smartphone (see page 7)
or SpecConnect with computer (see page 10). Please note
that for the Weather and ET Stations, the Wind Vane can on-
ly be configured (to identify
“
North
”)
using WatchDog Mobile.
