manualshive.com logo in svg

Spectrum Quad Plex, User Manual, Page: 30 / 62

Share
Download
Spectrum Quad Plex User Manual Download Page 30

RG B

C H A P T E R  2

I n s t a l l a t i o n

20

QuadPlex User Guide

350-12336-01 – updated April, 2020

All 

QuadPlex

 devices are configured as follows:

Standalone unit:

Receives power from the external power supply.

Is controlled by the 

QuadPlex

 application that is installed on a remote PC.

PCIe card:

Receives power from the Galileo or Zio W4000 device in which it is installed.

Requires its own Ethernet connection that is separate from and in addition to the Galileo 

or Zio W4000 Ethernet connection. 

Is controlled by the 

QuadPlex

 application that is installed on a remote PC. You cannot 

control a 

QuadPlex

 PCIe card from the Galileo or Zio W4000 device that includes that 

card.

IP address: 

By default, 

QuadPlex

 devices receive IP address assignments via Dynamic Host 

Control Protocol (DHCP). You may configure 

QuadPlex

 devices to use static IP addresses.

Multiple subnet support:

 All 

QuadPlex

 devices within the same subnet are detected using 

the Universal Plug and Play (UPnP) protocol. Devices installed across multiple subnets must 

be verified on a subnet-by-subnet basis.

Firmware:

 Be sure to update the formware on your 

QuadPlex

 device(s) before use, as 

described in 

“Firmware Updates” on page

 

47

. 

This section describes the 

QuadPlex

 application system requirements, and then guides through 

installing the software on a remote PC.

2.6.1

System Requirements

The remote PC on which you are installing the 

QuadPlex

 application must meet all of the following 

requirements:

Operating System:

 Windows® Server® 2019, Windows® Server® 2016, Windows® 10 

Standard (64-bit), Windows® 10 Professional (64-bit), Windows® 10 Enterprise (64-bit), or 

Windows® 10 IoT.

Network:

 The remote PC must be connected to the same subnet as the 

QuadPlex

 device(s) 

that it will be controlling, and those devices must be reachable from the host PC.

Rights:

 You may need administrator rights to install or uninstall certain software. See your 

Windows documentation or contact your system administrator for assistance, if needed.

2.5 Configuration

2.6 Installing the 

QuadPlex

 Application

Summary of Contents for Quad Plex































































Reviews:

No comments